Take a better check out the Google Pixel 6 Pro’s spec sheet thanks to this leak.
The Google Pixel 6 Pro has already been announced by Google, and many of its features have been shared by the company itself. For now, yes, we are not clear on the date of presentation of the new Google smartphones, although all the rumors point to the end of October.
Therefore, we are still separated by several weeks until the day of the presentation event of this new series of phones. And that can only mean that, most likely, the leaks will not give up until the last minute.
On this occasion, the people of XDA have had access to a good part of the technical specifications of the Google Pixel 6 Pro, thanks to an anonymous source. Thus, today we know a good handful of more details about the new devices.
5,000 mAh battery and other confirmed details of the Pixel 6 Pro
The leak begins by denying some recent rumors, such as the inclusion of pressure-sensitive edges, “Active Edge” in the Pixel 6 Pro. Actually, this function will not be included in the new device, in the same way, that it will not be included either. it was on the previous Pixel 5.
On the other hand, it will have the possibility of sharing battery wirelessly thanks to a reverse charging system, enabled through the Qi wireless charging system integrated into the terminal.
It has also been possible to confirm the inclusion of a screen with a resolution of 3120 x 1440 pixels in the Pixel 6 Pro, which will also be able to refresh at a frequency of 120 Hz. In addition, Google will allow combining the maximum screen resolution with the highest refresh rate supported by the panel.
The panel is capable of reducing its refresh rate to 10 Hz when necessary, for example, in those cases where static content is displayed and it is not necessary to refresh the screen content so frequently.
Other features that are confirmed are the inclusion of technology Ultra Wide Band -UWB-, which among other things will serve to unlock our car without using the key. Also, the device will have 5G connectivity thanks to a modem signed by Samsung, specifically the Exynos 5123.
The data of the new Tensor processor designed by Google has also been revealed, and it is indicated that the SoC will consist of a configuration of 2 x 2 x 4 cores, with two of them running at 2.8 GHz, another two at 2, 25 GHz, and four at 1.80 GHz.
All this will be supported by a 12 GB capacity LPDDR5 RAM module, a 5,000 mAh battery, and a Mali-G78 GPU. Its base storage would be 128 GB, and the device would have an on-screen fingerprint reader, Wi-Fi 6E, and software based on the Linux kernel version 5.10. This last data makes the rumors about the five years of assured updates stronger since it is a version of the kernel that will be officially supported until the end of the year 2026.
The details of the photographic system have also been revealed, indicating that the main camera of the Pixel 6 Pro will use a Samsung GN1 50 megapixel sensor. The ultra-wide-angle camera will use a 12-megapixel Sony IMX386, and the four-magnification optical zoom telephoto will use a 48-megapixel Sony IMX 586. As for the front sensor, it will be a 12-megapixel Sony IMX663.
Finally, it has been confirmed that the Pixel 6 Pro camera will have some new functions, including one called “baby mode”, and another for motion blur.